Home > Look for a product > ASO High Clean Poly Bag in Standard Sizes

ASO High Clean Poly Bag in Standard Sizes

Semiconductor applications Pharmaceutical applications

ASO High Clean Poly Bag in Standard Sizes

"ASO High Clean Poly Bag in Standard Sizes" solves customer problems with clean bags such as: "It is difficult to obtain a sufficient number of clean bags for our large number of production lots", "The bags have a long delivery time of about 1 month", and "We want inner packaging in an easy-to-use small pack size".

Major featuresCleanHighly cleanStandard sizeSterilizedAntistaticUV protection

Request a quote/Contact us

Overview

"ASO High Clean Poly Bag in Standard Sizes" solves customer problems with clean bags such as: "It is difficult to obtain a sufficient number of clean bags for our large number of production lots", "The bags have a long delivery time of about 1 month", and "We want inner packaging in an easy-to-use small pack size".

Features

◇ This product uses "additive-free low density polyethylene" as the raw material and is produced in an ISO class 6 (class 1000) cleanroom.

◇ The bags are a "highly clean type" where the number of particles on the inner surface of the bag is controlled. This product has been certified to comply with various standards, and is ideal for various applications including pharmaceuticals, medical devices, electronic parts, and semiconductors.

◇ We can deliver this product by the case. One case contains 30 to 500 bags, which are vacuum sealed in small units of 10 to 100 bags to make them easier to use.

◇ This product is available in 16 standard sizes and two thicknesses (0.05 mm and 0.1 mm). The size of the bags can be requested to suit the intended application. We have this product in stock and it is available for immediate delivery.
* Standard sizes are listed below.

◇ Upon your request, we can also deliver this product in gamma sterilized form by the case. The delivery time is about 14 days from the order date.

Standard compliance

Measurement item Standards
Material Food Sanitation Act, Notification No. 201 of the Ministry of Health and Welfare
Food Sanitation Act, Notification No. 55 of the Ministry of Health and Welfare
High Clean Poly Bag Japanese Pharmacopoeia Japanese Pharmacopoeia, 16th edition
Standard for polyethylene or polypropylene containers for aqueous injections
(transparency, appearance, heavy metals, lead, cadmium, residue on ignition, extractable substances, residue on evaporation, and cytotoxicity test)
USP <661> CONTAINERS
· Nonvolatile Residue · Heavy Metals
· Thermal Analysis · Multiple Internal Reflectance
· Buffering capacity
<87> Biological Reactivity Tests, Vitoro
European
Pharmacopoeia
3.1.4 (Materials Used For the Manufacture Of Containers)
FDA CFR21 177.1520 (c) 2.2

Inner surface cleanliness data

ASO High Clean Poly Bag in Standard Size 3
(0.05mm×260mm×380mm)
Particle size 2μm 3μm 5μm 10μm 25μm 40μm
Blank water Measured value 0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
Maximum 0 0 0 0 0 0
Average 0 0 0 0 0 0
Minimum 0 0 0 0 0 0
Product Measured value 26 20 2 0 0 0
44 34 9 0 0 0
37 23 3 0 0 0
Maximum 44 34 9 0 0 0
Average 36 26 5 0 0 0
Minimum 26 20 2 0 0 0
ASO High Clean Poly Bag in Standard Size 3A
(0.1mm×250mm×300mm)
Particle size 2μm 3μm 5μm 10μm 25μm 40μm
Blank water Measured value 0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
Maximum 0 0 0 0 0 0
Average 0 0 0 0 0 0
Minimum 0 0 0 0 0 0
Product Measured value 39 18 0 0 0 0
51 26 1 0 0 0
42 21 0 0 0 0
Maximum 51 26 1 0 0 0
Average 44 22 0 0 0 0
Minimum 39 18 0 0 0 0
* The tables show measured, not guaranteed, values.
[Measurement method]
The bags were filled with 500 mL of dust-free water with a blank count close to zero and then the bag was tied at the top. Then, 10 mL of the water was taken out of the bag and the number of particles in this sample was counted. This measurement was repeated three times and the average value calculated. The total particle numbers are shown in the tables above.
* Measuring device: Particle counter from RION

Film properties

Measurement item 0.05mm 0.1mm Measurement method
Tensile strength
[N/mm²]
MD 28.9 28.0 JIS Z-1702
TD 18.9 22.9
Tensile elongation
[%]
MD 233 271 JIS Z-1702
TD 629 642
Tear strength
[N/mm]
MD 99.0 29.4 JIS K-7128
TD 56.2 37.9
Seal strength [N/10mm] 9.1 19.5 Our measurement method
Oxygen permeability
[ml/m² · 24h · MPa]
38996 19701 JIS K-7126
Water vapor permeability [g/m² · 24h] 9.23 4.72 JIS Z-0208
* The above table shows measured, not guaranteed, values.

Data for ion and metal impurities

This product uses a raw material with minimal contamination by "ions" and "metal impurities", which are unfavorable for semiconductor and electronic devices.

Metal type 0.05mm 0.1mm
Li < 0.0004 < 0.0004
Na 0.0025 0.0053
Al 0.008 0.014
K < 0.0004 < 0.0004
Ca 0.29 0.017
Cr 0.0006 0.0004
Fe 0.0022 0.0019
Ni 0.0017 0.0005
Cu < 0.0004 0.0018
Zn 0.0022 0.0027
(In: ng/cm²)
* The above table shows measured, not guaranteed, values.

Sizes/Specifications

Size No. Size(mm)
[Width x Length]
Thickness(mm) Quantity
(No. of bags per plastic packaging bag x No. of bundles)
Minimum quantity
Size 1 150 x 250 0.05 500 bags per case
(100 bags x 5 bundles)
1 case
Size 2 200 x 300 0.05 500 bags per case
(100 bags x 5 bundles)
1 case
Size 3 260 x 380 0.05 500 bags per case
(100 bags x 5 bundles)
1 case
Size 4 300 x 450 0.05 500 bags per case
(100 bags x 5 bundles)
1 case
Size 5 360 x 500 0.05 200 bags per case
(50 bags x 4 bundles)
1 case
Size 6 400 x 550 0.05 200 bags per case
(50 bags x 4 bundles)
1 case
Size 7 460 x 600 0.05 200 bags per case
(50 bags x 4 bundles)
1 case
Size 8 550 x 900 0.1 80 bags per case
(20 bags x 4 bundles)
1 case
Size 9 680 x 1150 0.1 50 bags per case
(10 bags x 5 bundles)
1 case
Size 10 800 x 1400 0.1 40 bags per case
(10 bags x 4 bundles)
1 case
Size 11 1000 x 1800 0.1 30 bags per case
(10 bags x 3 bundles)
1 case
Size No. Size(mm)
[Width x Length]
Thickness(mm) Quantity
(No. of bags per plastic packaging bag x No. of bundles)
Minimum quantity
Size 1A 150 x 250 0.1 250 bags per case
(50 bags x 5 bundles)
1 case
Size 2A 200 x 250 0.1 250 bags per case
(50 bags x 5 bundles)
1 case
Size 3A 250 x 300 0.1 250 bags per case
(50 bags x 5 bundles)
1 case
Size 5A 350 x 400 0.1 100 bags per case
(25 bags x 4 bundles)
1 case
Size 7A 450 x 600 0.1 100 bags per case
(25 bags x 4 bundles)
1 case

This product is also available in custom sizes.

We produce this product to suit your application.
Feel free to contact us.

Unfortunately, we cannot answer any telephone inquiries.
If you have any questions, please contact us through the website and we will reply to your inquiry by e-mail.
Thank you for your understanding.

Go to the top of Look for a product

to page top